0

Get a quote today  

Are you looking for Puncture Repair for your vehicle?

Not every time a car tyres gets punctured; it is necessary to replace it with a new one. Instead, just contact Colins Tyres for car a puncture repair service Dyce.

If the damaged tyre meets the BS AU 159 guidelines, we can easily help.

We are a renowned garage based at Farburn Terrace Dyce AB21 7DT, offering top-quality puncture repairs. Our efficient technicians inspect the punctured tyres carefully and depending on their condition, we adopt any of these three repair methods:

  • Plugging
  • Patching
  • Plugging & Patching

What are BS AU 159 guidelines?

According to these guidelines, a car tyre must meet specific criteria to qualify for repair services. The punctured area must not exceed 6 mm in diameter, and there must not be exposed cords. Additionally, the tread depth must be a minimum of 1.6 mm (the legal minimum), and there must not be any inner or outer bulges present. Visible damage on the tyre beads is also not permitted, as well as major damage on the carcass, sidewalls, or treads of the tyres.

If your vehicle’s tyres meet all these criteria, you can come to us for tyre repairs Dyce, straight away. If there are any of the issues mentioned above, we will suggest a tyre replacement.

How Do We Conduct Puncture Repair Dyce?

Here are the steps we follow while repairing punctured car tyres:

  • We will dismount the damaged tyre of your car and check the punctured part.
  • If there are any sharp objects piercing the tyre, we will remove them immediately.
  • Next, we will cut a puncture channel from inside of the damaged tyre.
  • We will clean about 10 mm to 20 mm wide area around the puncture with a pre-buff cleaner.
  • Next, we will draw an outline, holding a rubber patch on the punctured area.
  • After that, we will buff the inner lining using a domed buffing rasp.
  • We will apply a special vulcanisation accelerator solution to the puncture channel.
  • Next, we will plug a tyre repair patch in puncture channel.
  • We will plug the patch outwards carefully, to check if the patch is properly attached to tyre’s inner part.
  • Next, we will seal the buffed area, tyre repair patch, and plug base, using a top-grade inner liner sealant.
  • In the final step, we will cut extra part of the tyre patch and mount tyre back car.
  • After inflating the tyre to the right pressure, you are ready to go.

Interested in concluding your “puncture repair near me” searches with us?

Call us on 01224 775447. We are available from Monday to Friday.

Note: You can also book our services online!